Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Akvapur SM 3000

Akvapur SM 3000 is a foil coating adhesive for furniture doors.

Special features

  • Low activation temperature
  • use of 2 components provides high after heat resistance

Application

Akvapur SM 3000 is used for the PVC foil coatings of MDF or other wood-based board blanks milled with cutter when using membrane or deep drawing techniques. Also suitable for manufacturing upholstered furniture and office chairs.

Package Size

Product Code

Akvapur SM 3000 15 kg T2391.015  
Akvapur SM 3000 IBC cont Inliner T2391.997  
Package Size Akvapur SM 3000 15 kg
Product Code T2391.015
 
Package Size Akvapur SM 3000 IBC cont Inliner
Product Code T2391.997
 

Type/binder

PUD

pH

8.5

Mixing ratio

Akvapur SM 3000: 100 weight parts
Hardener C : 0 - 5 weight parts

Viscosity

2000 mPas (Brookfield, RVT +20°C)

Application temperature

To activate the adhesive film, a minimum temperature of 55-60°C is required. The adhesive must be activated within 20 hours following the adhesive application (foil coating).

Coatable

In room temperature 30-60 min

Storage

In unopened containers at +20 °C for 12 months.

Instructions for use

FOIL COATING Thoroughly mix Akvapur SM 3000 with Hardener C. The surfaces to be glued should be free from dust, grease etc. Apply an even uniform coat of the adhesive onto the board blanks with an air assisted airless spray gun (Airmix®) or a high pressure spray gun. Let the adhesive dry until transparent. After the drying time the coating foil is preheated and drawn and/or pressed onto the board blank using a deep drawing or membrane press. See the instructions provided by the foil and machine manufacturer.

MANUFACTURING OF UPHOLSTERED FURNITURE: Apply a uniform, opaque layer of the adhesive onto the two surfaces to be bonded using an air assisted airless spray gun (Airmix®) or a high pressure spray gun. Hardener is not usually used when gluing upholstered furniture and office chairs. Bonding completed without hardener can be activated within 7 days.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Made in Finland, Key flag