Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Akvapur SM 1000

Akvapur SM 1000 is a foil coating adhesive for furniture doors.

Special features

  • 1-component
  • Good and even surface quality

Application

Akvapur SM 1000 is used for the PVC foil coatings of MDF or other wood-based board blanks milled with cutter when using membrane or deep drawing techniques.

Package Size

Product Code

Akvapur SM 1000 15 kg T2905.015  
Package Size Akvapur SM 1000 15 kg
Product Code T2905.015
 

Type/binder

PUD

pH

8.5

Viscosity

2000 mPas (Brookfield, RVT +20°C)

Application temperature

To activate the adhesive film the temperature of at least +70°C is needed.

Temperature resistance when dry

Adhesive joint heat resistance 80-90°C

Coatable

In room temperature 30-60 min

Storage

In unopened containers at +20 °C for 6 months.

Instructions for use

Stir properly before use. The surfaces to be glued should be free from dust, grease etc. Apply an even uniform coat of the adhesive onto the board blanks with an air-assisted airless spray gun (Airmix®) or a high-pressure spray gun. Leave the adhesive dry until transparent. After the drying time, the coating foil is preheated and drawn and/or pressed onto the board blank using a deep drawing or membrane press. When the thermal activation is sufficient, the after-heat resistance of the adhesive joint (PVC/MDF) will be high, approx. 80–90°C. When gluing, follow the instructions provided by the foil and machinery manufacturers.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Made in Finland, Key flag