Kiiltomelt PS 300
Hot melt adhesive

Kiiltomelt PS 300 is an unfilled EVAC-based hot-melt adhesive for profile coating.

Special features

  • M1 Classification

Links

Materials

Application

Kiiltomelt PS 300 is an unfilled profile coating hot-melt adhesive, which can be used for back reinforced veneer or different types of paper foils. Adhesive is compliant with M1 Emission Classification of Building Materials.

Package Size Product Code
Kiiltomelt PS 300 10 kg T7304.010
Kiiltomelt PS 300 400 kg Bigbag T7304.500
Colors

beige

Softening point

85 °C (DIN 52011)

Viscosity

6 500 mPas, 180 °C, 5 s¯¹

Working conditions

+18 - 22 °C

Application temperature

160 -185 °C (on the applicator roll)

Package sizes

20 kg, 400 kg

Air humidity

60…70 %

Wood moisture content

7 - 10 %

Storage

In unopened containers, at max. +40 °C, for 36 months

Instructions for use

The adhesive is melted in the adhesive tank. The feed speed of the machine is 15–40 m/min. If the feed speed is lower than recommended, the adhesive temperature on the applicator roll must be raised in order to prevent the adhesive from cooling prematurely. For longer breaks in the work the adhesive temperature should be decreased, otherwise the adhesion and flowing properties of the adhesive may weaken.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1 emission classification for building material
Key Flag