Kiilto Trennmittel S
Release agent

Kiilto Trennmittel S is a low viscous release agent.

Special features

  • Suitable for preventing reactive adhesives’ adhesion  

Links

Materials

Application

Kiilto Trennmittel S is a low viscous release agent that prevents reactive adhesives from adhering onto protected surfaces.

Package Size Product Code
Kiilto Trennmittel S 10 l T2925.010
Type/binder

Water based emulsion, release agent

Consistency

A viscous solution

Density/specific weight

1.01

pH

8.5

Colors

Milky, white

Storage

In unopened containers at +20 °C for 12 months. After long storing, stir before use.

Instructions for use

Apply using a brush or by spraying an even, thin layer. After spreading allow to dry as an even film. Extra heat may be used to shorten the curing time. Do not allow drying temperatures of over +95 °C. The maximum operation temperature of the protected surface is +185 °C. The areas not to be covered must be carefully protected. Spraying might spread the release agent on a wide area.

If the release agent has not cured, yet, it may adhere onto the surfaces of the objects to be glued and impede the final treatment.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, go to www.kiilto.com.