Kiilto TM DF
Quick setting wallplaster

A fast-setting, light wall plaster for dry and wet areas. Ideal, for example, filling conduits. Layer thickness in holes and conduits 5-70 mm, in over plastering 5-20 mm. Ready to be waterproofed after 24 hours. Cementitious.

Special features

  • fast-setting, light to apply, dust reduced 
  •  precorrections, fillings 
  • coverage 1.4 kg/m²/mm
  • coatable: 24 h
  • interior areas


   

Links

Materials

Application

Kiilto TM is a quick setting wall plaster for rock material interior walls. The finished surface can be tiled or treated with Kiilto waterproofing membrane. It can also be over plastered with other Kiilto wall plasters depending on the application.

Package Size EAN Code
20 kg 6411513953204
Bond strength

> 0,5 MPa (EN 998-1)

Colors

Dark grey

Compression strength

CSIV (EN 998-1)

Coverage

1 mm layer/m² solid matter weights approx. 1.4 kg

Layer thickness

partial levelling 5-70 mm, over plastering 5-20 mm.

Max. grain size

approx. 3 mm

Mixing ratio

4.0-4.8 l water / 20 kg bag

Package sizes

20 kg bag

Storage

In an unopened package max. 6 months in dry conditions.

Substrate humidity

concrete < 90 % RH

Working conditions

recommendation: +18–20 °C, lowest operating temperature +5 °C

Working time

20-30 minutes (+18 °C)

Instructions for use

The surfaces to be plastered must be solid, clean and free from dust. Weak and loose particles must be removed carefully. Dry surfaces must be lightly moistened prior to plastering.

Strew Kiilto TM DF powder slowly in cool (+18–20 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 2-3 min and then remix once again. Moisten surface with water before plastering. Apply plaster on a matt surface using, for example, a steel trowel. The surface can be finished by moistening it before the final smoothing.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.