Kiilto Pro Construct
Construction adhesive

Ideal for fixing mineral wool, styrox and acoustic panels and different types of soft boards on walls and ceilings.
Good initial tack.

Special features

  • excellent initial tack
  • off-white
  • coverage 1–2 m²/l, if applied in dots, even 4 m²/l
  • suitable materials: 
    acoustic panels 
    gypsum boards 
    renovation gypsum panels
    halltex or similar interior cladding panels

Links

Materials

Application

Special adhesive with good initial tack for the gluing of insulation and acoustic panels as well as different types of soft panels on walls and ceilings.

Package Size EAN Code
1 l 6411511022018
3 l 6411511022032
10 l 6411511022100
15 l 6411511022155
Application temperature

+18-25 °C

Coverage

Approx. 1–2 m2 depending on the substrate, glued material and gluing method.

Density/specific weight

1.5 kg/l

Frost resistance

not stable (frost-resistant adhesive joint)

Package sizes

1 l, 3 l, 10 l, 15 l

Storage

In unopened containers, above +1°C, for 18 months. After long storing, stir before use.

Substrate humidity

concrete: max. 4 % by weight or below 90 % RH

Working conditions

If the air humidity is very high, the curing process will be slower and problems may occur.

Working time

15–25 min.
late wet bonding:

Instructions for use

Suitable substrates are concrete, masonry, building board, painted surfaces (moisture resistant) and most plastics (excl. PE, PP or PTFE). The substrate must be dry and free of dust. Depending on the texture and weight of the material, apply adhesive in dots in 8–10 cm wide strips or on the entire surface so that the board edges are evenly covered with the adhesive. Once applied, press the board onto the substrate immediately. We advise you to place the first panel 5–10 cm off its final position and then slide it firmly to the intended place and tap into position. The adhesive has good initial tack, so no additional support is usually needed, not even with inverted applications. The bond acquires its final strength within 1–5 days depending on the prevailing conditions. Do not try to accelerate the drying via artificial means.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1 emission classification for building material
LEED
Key Flag