Kiilto PrimerOne
Fast drying primer
A primer to improve adhesion between Kiilto waterproofing membrane and levelled, concrete or board substrate in wet room areas. Ensure substrate’s suitability for use in a wet room. Fast drying. Water-based.
Special features
- fast drying
- water-based
- suitable also for substrate priming before levelling compounds
Links
Materials
A fast drying primer for waterproofing membranes. Can also be used with Kiilto levelling compounds.
| Package Size | EAN Code |
|---|---|
| 1 l | 6411514201014 |
| 3 l | 6411514201038 |
| 10 l | 6411514201106 |
+10–25 °C
Yellow
undiluted approx. 8 m²/l
30 min (depending on prevailing conditions)
approx. 1
Freezing
Under waterproofing membranes, use primer undiluted or diluted 1:1. Thinning prolongs the drying time of the primer.
Under Kiilto levelling compounds:
- Concrete and cement-based levelling compounds (dilute: 1 part primer and 4 parts water)
- Floors with old adhesive remains, such as synthetic resin and bitumen adhesive (use undiluted)
- Moisture-sensitive substrates, such as gypsum boards and wooden substrates (use undiluted)
- Board floors, such as plywood, gypsum plasterboard etc. (use undiluted)
- Non-absorbent substrates, such as paint and clinker (use undiluted)
1l, 3l and 10l
In unopened containers, above +1 °C, for 1 year.
approx. 8
Remove cement laitance, existing surface materials, sanding dust, loose particles and grease from the subsurface. Sand or grind by machine, if necessary. Shake well before use. Apply the primer as a thin, even layer onto the surface by using, for example, a roller, brush or trowel. Rub firmly. The primer layer must be dry before the membrane is applied. Study Kiilto waterproofing procedure guide before starting the job.
Under Kiilto levelling compounds:
- Concrete and cement-based levelling compounds (dilute: 1 part primer and 4 parts water)
- Floors with old adhesive residue, such as synthetic resin and bitumen adhesive (use undiluted)
- Moisture-sensitive substrates, such as gypsum boards and wooden substrates (use undiluted)
- Board floors, such as plywood, gypsum plasterboard etc. (use undiluted)
- Non-absorbent substrates, such as paint and clinker (use undiluted)
Concrete and levelled substrates can be smoothed immediately after priming. Let building boards, non-absorbent surfaces and surfaces with old adhesive residue dry before levelling. The prevailing conditions can strongly affect the drying time. Levelling must be done within 24 hours after priming at the latest.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to the material safety data sheet. For information on product and package disposal, visit www.kiilto.com.