Kestokol 93 AL
2-component epi adhesive
Kestokol 93 AL is a 2-component isocyanate emulsion polymer adhesive suitable for bonding latex-primed aluminium to wood-based board in the exterior door industry.
Links
Materials
Kestokol 93 AL + 93 AL hardener is an emulsion polymer isocyanate adhesive with good water and heat resistance.
Kestokol 93 AL + 93 AL hardener is a 2-component special adhesive for gluing of appropriately pre-treated alumininum onto chipboard, plywood or other wood-based material.
The adhesive is not suitable for electronically anodized aluminum.
| Package Size | Product Code |
|---|---|
| Kestokol 93 AL kontti | T1327.992 |
100 : 15 (100 weight parts Kestokol 93 AL adhesive + 15 weight parts Kestokol 93 AL-hardener)
5500 mPas (Brookfield RVT 20 ºC)
8500 mPas (Brookfield RVT 20 ºC)
light beige
The pot-life of the mixture is at most approx. 60 min (20 °C)
4 - 8 min (consumption 130 - 160 g/m²)
130 - 160 g/m
at least 20 min (20 °C)
+ 5 °C
6 - 15 %
In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.
Add 15 weight parts of Hardener Kestokol 93 AL into 100 weight parts of Kestokol 93 AL adhesive and stir well until the colour is even. If the pot-life of the mixture is exceeded, the mixture starts to foam. New mixture can be added into an older mixture within the pot-life.
Surfaces to be bonded must be free from dust, grease etc. Check that the joints fit well. Apply the adhesive one-sided in an even layer. Position the pieces together and press. For series production, tests should first be carried out to determine the exact pressing times The parts should be stored for a while before further machining to reach the necessary bond strength.
The final strength and water resistance of the joint is achieved within 7 days.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.