Kestokol 200
PVAc adhesive

Kestokol 200 is an EN 204/D2 durability class PVAC adhesive for wood.

Special features

  • 1-component
  • Storage time 12 months
  • Universal adhesive

Links

Materials

Application

Kestokol 200 is a universal PVAc dispersion adhesive for the wood industry. Kestokol 200 is suitable for board, assembly, lamination, edge and veneer gluing. As a D2 classified adhesive Kestokol 200 can be used indoors, in glued joints which are in contact with water or moisture only for short periods of time.

Package Size Product Code
Kestokol 200 100 kg T1050.100
Kestokol 200 15 kg T1050.015
Kestokol 200 IBC cont T1050.994
Kestokol 200 kontti T1050.992
pH

5.5 - 7.0

Colors

White, transparent after drying

Viscosity

14000 mPas (Brookfield, RVT +20 °C)

Open time

8 - 10 min

Consumption

120 - 180 g/m²

Pressing time

7 - 10 min (20 °C )

Minimum film forming temperature

+4 °C

Wood moisture content

6 - 15 %

Storage

In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.

Instructions for use

Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a cold, hot or high frequency press. The final strength of the bond is reached within 7 days.

If in contact with iron, some discolouration in the adhesive bond may occur.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1 emission classification for building material
EN 204 D2 water resistance classification
Key Flag