Kiilto introduces a new type of permanent tack adhesive for loose lay floor coverings
The new Kiilto Pro Grip is designed for the installation of all types of loose lay floor coverings on both for non-absorbent and absorbent substrates. Thanks to its low viscosity, Kiilto Pro Grip is easy to apply either by a roller or trowel. Tack-up time before installation is only approx. 15 min depending on substrate’s absorbency and the amount of adhesive applied. Long tack time ensures good adhesion even after several hours from glue spreading. The flooring is easy to remove later and replace with a new flooring on the same adhesive bed. Kiilto Pro Grip can be removed from an non-absorbent substrate, for example, with Kiilto Maalarinpesu detergent according to instructions.